Date ( Creation )

2009-09-01

Presentation form

Digital map

Purpose

Topo50 is the official topographic map series used by New Zealand emergency services. When using Topo50 data, please be aware of the following: 1. The existence of a road or track does not necessarily indicate public right of access. 2. Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts. 3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data. 4. Contours and spot elevations in forest and snow areas may be less accurate. 5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies. 6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Name

*.xml

Version

Unknown

ANZLIC Jurisdictions ( Theme )

• New Zealand

Use limitation

Released under Creative Commons By with: Following Disclaimers: 1. The existence of a road or track does not necessarily indicate public right of access. 2. Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts. 3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data. 4. Contours and spot elevations in forest and snow areas may be less accurate. 5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies 6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit. Following Attribution: If you publish, distribute or otherwise disseminate this work to the public without adapting it, the following attribution to Land Information New Zealand should be used: 'CC-By Land Information New Zealand� If you adapt this work in any way or include it in a collection, and publish, distribute or otherwise disseminate that adaptation or collection to the public, the following attribution to Land Information New Zealand should be used: �Contains data sourced from Land Information New Zealand under CC-By.' If �attribution stacking� problems exist then the requirement to display the above attribution statements is waived and in lieu the attribution statement is to be made in any terms or conditions associated with the work/ product/ application/ etc.

Use limitation

Copyright 2011 Crown copyright (c) Land Information New Zealand and the New Zealand Government. All rights reserved

Spatial representation type

Vector

Denominator

50000

Metadata language

English

Character set

UTF8

Topic category

• Imagery base maps earth cover

Environment description

Version 6.2 (Build 9200) ; Esri ArcGIS 10.6.1.9270

Reference system identifier

EPSG / 0 / 8.6.2

Topology level

Geometry only

Geometric object type

Composite

Geometric object count

114

Distribution format

• SDE Feature Class ()

OnLine resource

https://data.linz.govt.nz/layer/74-nz-chatham-is-cliff-edges-topo-150k/  

Other

dataset

Statement

LINZ and our predecessors have been responsible for national topographic mapping in New Zealand for more than a hundred years. The first digital data at 1:50,000 was created in the late 80�s and early 90�s by scanning the 1:50,000 maps that existed at the time (known as the NZMS 260 series, which replaced the imperial NZMS 1 series at 1inch to 1 mile) The raw data was created by photogrammetrists who from 1974 to 1997 mapped the country from overlapping pairs of aerial photographs. Cartographers then took the data and added symbols and text, and created the colour separations needed to produce the printed maps. From 1994 to 2006 LINZ used orthophotos to update the map data. Today the map data is updated primarily from satellite imagery, and data supplied from Department of Conservation, Transit NZ and others. LINZ releases regular updates of the Topo50 maps and data; for details refer http://www.linz.govt.nz/topography/topo-maps/topo50/update-history Some features are subject to change more than others. For example in any given map revision, it is likely that road data will undergo more change than, for example, fumeroles. However, all data is examined during a full data revision.

gmd:MD_Metadata

File identifier

0d461cef-8d1b-2de0-3b07-1595e552e9a0   XML

Metadata language

English

Character set

UTF8

Hierarchy level

Dataset

Hierarchy level name

dataset

Date stamp

2022-11-28T12:22:32

Metadata standard name

ISO 19139 Geographic Information - Metadata - Implementation Specification

Metadata standard version

2007